'shear beam load cell 2 ton'

The single-ended shear beam load cell is a ubiquitous component in industrial weighing and force measurement applications, valued for its robust construction, accuracy, and relatively simple design. This comprehensive overview will delve into its operational principles, construction, applications, advantages, limitations, and key considerations for selection and use. Operational Principle: Shear Stress for Precision At the heart of the single-ended shear beam load cell's functionality lies the principle of shear stress. Unlike bending beam load cells that primarily rely on tensile or compressive stress on a beam, shear beam load cells are designed to measure the shear deformation of a carefully machined beam element. Imagine a rectangular beam fixed at one end and free at the other, where the force is applied. When a vertical force is applied to the free end, the beam experiences both bending and shear. However, the critical design aspect of a shear beam load cell is to ensure that the strain gauges are strategically placed in areas where the shear stress is dominant and relatively uniform, minimising the influence of bending moments. Typically, the load cell body is a single, monolithic piece of high-grade alloy steel or aluminium. Within this body, a specific section is machined to create a “shear web” or “shear area.” When a downward force is applied to the free end of the load cell (the “loading point”), this shear web deforms. Strain gauges, which are tiny electrical resistors whose resistance changes proportionally to applied strain, are bonded to this shear web. These strain gauges are typically arranged in a Wheatstone bridge configuration. This bridge consists of four strain gauges connected in a specific way to maximise sensitivity and compensate for temperature changes. As the shear web deforms under load, the resistance of the strain gauges changes. This change in resistance unbalances the Wheatstone bridge, producing a small electrical voltage output that is directly proportional to the applied load. This voltage, usually in millivolts (mV), is then amplified and converted into a measurable weight or force reading by a dedicated instrumentation system. Construction: A Blend of Durability and Precision The construction of a single-ended shear beam load cell is critical to its performance and longevity: Material: The body is typically made from high-strength materials like alloy steel (often nickel-plated for corrosion resistance), stainless steel (for harsh environments and food-grade applications), or aluminium (for lighter applications). The choice of material impacts the load cell's capacity, environmental resistance, and cost. Beam Element/Shear Web: This is the precisely machined section where the shear stress is concentrated. The dimensions and geometry of this element are crucial for the load cell's sensitivity, linearity, and repeatability. Strain Gauges: These are the sensing elements, typically foil-type strain gauges, bonded with specialised adhesives to the shear web. Their placement and orientation are meticulously planned to capture the shear strain accurately. Encapsulation/Sealing: Load cells are often used in challenging industrial environments. Therefore, robust sealing is essential to protect the internal components (strain gauges and wiring) from moisture, dust, chemicals, and other contaminants. This is achieved through hermetic sealing (welding), potting compounds, or a combination of both, often resulting in an ingress protection (IP) rating (e.g., IP67, IP68). Mounting Holes: These are precision-drilled holes on both the fixed and loading ends, allowing for secure attachment to the weighing structure or application. Cable Gland and Cable: A durable cable gland ensures a sealed entry point for the electrical cable, which transmits the output signal to the weighing indicator or control system. The cable itself is typically shielded to minimise electrical interference. Applications: Versatility in Weighing and Force Measurement The versatility of single-ended shear beam load cells makes them indispensable in a wide array of industries: Platform Scales: This is perhaps their most common application. Multiple shear beam load cells are used in conjunction to support the platform, providing accurate weight measurements for various goods. Tank and Hopper Weighing: They are ideal for measuring the contents of tanks, silos, and hoppers in industries such as chemical processing, food and beverage, agriculture, and construction. They are often mounted on compression load mounts to accommodate thermal expansion and contraction. Conveyor Belt Weighing: Integrated into conveyor systems, they measure the weight of materials as they are transported, crucial for inventory management and process control. Process Weighing: Used in batching systems, filling machines, and other automated processes where precise control over material quantities is required. Packaging Machinery: Essential for ensuring accurate filling of products into bags, boxes, or containers. Force Measurement: Beyond just weight, they are used to measure applied forces in testing rigs, material testing machines, and various industrial equipment. Medical Devices: In certain medical applications requiring precise force sensing, albeit often with specialised designs and materials. Advantages: Why Choose a Single-Ended Shear Beam Load Cell? Several compelling advantages contribute to the widespread adoption of this load cell type: High Accuracy and Repeatability: Their design inherently provides excellent linearity and minimal hysteresis, leading to precise and consistent measurements. Robust and Durable: The solid, monolithic construction makes them highly resistant to shock loads, vibration, and general industrial abuse. Good Side Load Rejection: While not immune to side loads, their design generally offers better rejection of off-center or eccentric loading compared to some other load cell types, especially when used with proper mounting hardware. Relatively Compact Size: For their capacity, they are often quite compact, making them suitable for installations with limited space. Cost-Effective: Compared to some other high-precision load cell types, they offer a good balance of performance and cost. Ease of Installation: Their single-ended design simplifies mounting in many applications. Wide Range of Capacities: Available in a broad spectrum of capacities, from a few kilograms to several tons, catering to diverse weighing needs. Environmental Protection: Many models offer high IP ratings, making them suitable for use in washdown areas or dusty environments. Limitations and Considerations: Despite their advantages, it's important to be aware of certain limitations and key considerations: Sensitivity to Off-Center Loading (Though Better than Some): While good at rejecting side loads, extreme off-center loading can still introduce errors. Proper load application and mounting accessories (e.g., self-aligning feet, load buttons) are crucial. Temperature Effects: Like all strain gauge-based sensors, temperature fluctuations can affect accuracy. High-quality load cells incorporate temperature compensation, but extreme temperature swings can still be a factor. Dynamic Loading: While robust, continuous high-frequency dynamic loading can eventually lead to fatigue failure. For applications with rapid force changes, dynamic load cells might be more suitable. Creep: Over extended periods under constant load, a small, gradual change in output (creep) can occur. Reputable manufacturers specify creep specifications, and it's generally minimal in quality load cells. Overload Protection: Exceeding the rated capacity can permanently damage the load cell. Implementing mechanical overload stops or electronic overload protection is vital. Mounting Hardware: The performance of a shear beam load cell is heavily dependent on proper mounting. Using appropriate load cell mounts, self-aligning feet, and ensuring a rigid, level foundation is critical to achieving accurate results. Selection Criteria: When selecting a single-ended shear beam load cell, several factors must be carefully considered: Capacity: Determine the maximum expected load, including any potential overloads. Choose a load cell with sufficient capacity to avoid damage. Accuracy Requirements: Consider the required precision for the application (e.g., legal-for-trade, process control). Environmental Conditions: Evaluate temperature range, humidity, presence of dust, moisture, chemicals, and corrosive agents. This will dictate the required IP rating and material (e.g., stainless steel for washdown). Mounting Configuration: Assess how the load cell will be integrated into the system and select a model compatible with the mounting structure. Output Signal: Most shear beam load cells have a millivolt output, requiring an amplifier and indicator. Cable Length and Type: Consider the distance to the instrumentation and potential electrical interference. Manufacturer Reputation and Support: Choose a reputable manufacturer known for quality, reliability, and good technical support. We are also supply in Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, and West Bengal.

Pancake Load Cell: The Ultimate Guide for Precision Force Measurement In industries that rely heavily on accurate force measurement, the pancake load cell stands out as a robust and reliable solution. Also known as low-profile load cells, these devices are designed to offer precise force readings in both tension and compression applications. Whether you're working in aerospace, automotive, manufacturing, or testing environments, understanding how pancake load cells work—and how to choose the right one—is crucial for efficiency and safety. In this comprehensive guide, we’ll explore what a pancake load cell is, how it works, its key features, applications, and tips for selecting the right model for your needs. What Is a Pancake Load Cell? A pancake load cell is a type of force transducer designed with a flat, disc-like shape—hence the name “pancake.” These load cells are engineered to measure axial loads, either in tension or compression, and they are known for their high accuracy, low profile, and wide load capacity range (from a few kilograms to several tons). They are typically made from high-strength stainless steel or aluminum and feature strain gauge technology that converts applied mechanical force into an electrical signal. This allows precise force monitoring in various environments. Key Features of Pancake Load Cells Low Profile Design The compact, disc-shaped design makes pancake load cells ideal for applications with limited vertical space. Their flat geometry enables easy integration into machines and test setups. High Accuracy and Repeatability Due to their symmetrical design and central loading structure, these load cells deliver high linearity and repeatability, even in harsh conditions. Tension and Compression Measurement Pancake load cells are capable of measuring forces in both directions, making them highly versatile. Overload Protection Many models come with built-in overload protection, ensuring durability and minimizing damage from excessive loads. High Load Capacity Pancake load cells are available in various capacities, ranging from a few hundred pounds to over 500,000 pounds (or 250 tons). Customizable Options Manufacturers often provide custom mounting holes, integrated connectors, and environmental sealing (IP65, IP67, etc.) to suit specific applications. How Does a Pancake Load Cell Work? Pancake load cells operate on the strain gauge principle. Here’s a simplified breakdown of how they work: When a force is applied to the central hub of the load cell, it causes slight deformation in the metal body. This deformation is picked up by bonded strain gauges—tiny sensors that change resistance based on the amount of strain. The change in resistance is converted into a measurable electrical signal (typically in mV/V), which is then amplified and interpreted by a data acquisition system or digital display. The central loading mechanism ensures that force is evenly distributed, minimizing off-axis errors and enhancing accuracy. Common Applications of Pancake Load Cells Pancake load cells are used in a wide range of industries, including: 1. Automotive Testing Used for engine testing, brake testing, and chassis load measurement to ensure vehicle safety and performance. 2. Aerospace Ideal for structural testing, fatigue testing, and component validation under extreme conditions. 3. Industrial Automation In automated manufacturing lines, pancake load cells help monitor applied forces in robotic arms, press machines, and welding systems. 4. Material Testing Essential for tensile and compression testing of metals, plastics, and composites in R&D labs and quality control. 5. Construction and Structural Monitoring Used to monitor load distribution in bridges, support structures, and cranes. Advantages Over Other Load Cell Types While there are many types of load cells—such as S-beam, shear beam, and button load cells—pancake load cells offer unique advantages: Feature Pancake Load Cell S-Beam Load Cell Button Load Cell Load Direction Tension & Compression Tension & Compression Mostly Compression Accuracy Very High Medium to High Medium Profile Low Medium Very Low Capacity Range Broad Medium Low to Medium Mounting Requirements Central Bolt Threaded Rod Flat Surface Choosing the Right Pancake Load Cell When selecting a pancake load cell, consider the following factors: Load Capacity Choose a capacity that suits your expected force range but allows for potential overloads. Always factor in a safety margin. Environmental Conditions If used in outdoor or harsh industrial environments, opt for load cells with high IP ratings and corrosion-resistant materials. Mounting Requirements Make sure the load cell has the right mounting hole pattern and thread specifications for your setup. Output Signal Type Determine whether you need an analog output (e.g., mV/V, 4-20mA) or a digital output (e.g., RS485, USB) based on your data acquisition system. Cable and Connector Options Check whether the load cell comes with an integrated cable or detachable connector. In some cases, a shielded cable is important to reduce electrical noise. Calibration and Maintenance Tips To maintain the accuracy and longevity of your pancake load cell: Calibrate regularly using certified calibration weights or services. Avoid lateral forces or off-axis loading, which may affect performance. Inspect the load cell and mounting hardware for wear or misalignment. Store and handle with care, especially the sensor cable and connector area. Final Thoughts : A pancake load cell is a precision force measurement device known for its low profile, high accuracy, and versatility. Whether you're involved in R&D, industrial automation, or structural testing, these load cells offer reliable performance across a broad range of applications. When properly selected and maintained, a pancake load cell can be a long-term solution that enhances the accuracy and safety of your measurement systems.

Tension Link Load Cell: Reliable Force Measurement for Heavy Lifting and Load Monitoring In industries where lifting, rigging, and load monitoring are routine operations, safety and precision are paramount. One device that plays a vital role in ensuring both is the tension link load cell. Known for its rugged construction, high accuracy, and ease of integration, the tension link load cell is the go-to solution for dynamic force measurement in tension. From crane operations and hoist load monitoring to pull testing and wire tension measurement, this versatile sensor delivers consistent and reliable results. This article explores what a tension link load cell is, how it works, its benefits, and the industries where it’s most effectively applied. What Is a Tension Link Load Cell? A tension link load cell is a force sensor designed to measure tensile loads between two points. It is typically shaped like a rectangular or oval link with load pins at either end. These devices are inserted directly into a lifting or pulling line, such as between a shackle and hook on a crane, to continuously measure the force applied during operation. Also known as a dynamometer load cell, inline tension load cell, or wireless load link, this load cell type is engineered to endure extreme forces while providing accurate real-time data to operators. How Does a Tension Link Load Cell Work? Tension link load cells operate using strain gauge technology. When a tensile force is applied to the link, it causes a slight deformation in the load-bearing body. Strain gauges, typically bonded to the internal surface, detect these deformations as changes in electrical resistance. This data is converted into an analog or digital signal that reflects the amount of tension being applied. Modern tension link load cells often include wireless telemetry systems, allowing data to be transmitted to handheld displays, remote monitors, or industrial control systems without the need for cables. Key Features of Tension Link Load Cells ✅ High Accuracy These load cells offer excellent measurement accuracy, often within ±0.1% of full scale, making them ideal for precision lifting and load control. ✅ High Capacity Ranges Available in a wide range of capacities—from 1 ton to over 500 tons—tension link load cells can accommodate everything from small-scale rigging operations to large offshore lifting projects. ✅ Robust Construction Made from aerospace-grade aluminum or stainless steel, these sensors are built to withstand heavy usage and harsh conditions, including saltwater, dust, and extreme temperatures. ✅ Wireless Data Transmission Many modern tension link load cells come equipped with Bluetooth or RF modules, enabling real-time remote monitoring up to several hundred meters away. ✅ Portable and Easy to Install They are lightweight, mobile, and can be quickly installed between shackles or hooks without any modifications to the lifting equipment. Applications of Tension Link Load Cells Tension link load cells are essential in industries where accurate tensile force measurement is critical for safety, compliance, and process optimization. 1. Cranes and Hoists Tension link load cells are widely used for crane load monitoring, ensuring loads don’t exceed lifting capacity and helping prevent accidents due to overloading. 2. Marine and Offshore Used in anchor handling, winch monitoring, and mooring tension systems, these load cells provide critical data in ship and offshore rig operations. 3. Construction and Rigging In large-scale lifting projects, like bridge segments or structural components, tension link sensors ensure every lift is performed safely and efficiently. 4. Utilities and Energy These load cells help measure tension in power line stringing, wind turbine cable installation, and pipeline pulling. 5. Testing and Certification Often used in load testing, destructive testing, and equipment certification, tension link load cells validate lifting gear before use in the field. Benefits of Using Tension Link Load Cells ✔ Safety Assurance Overloading cranes or rigging systems can lead to catastrophic failure. Tension link load cells provide real-time load feedback, enabling operators to make safe decisions. ✔ Compliance with Regulations Load cells help ensure compliance with OSHA, LOLER, and other lifting safety standards by recording and documenting load data. ✔ Wireless Convenience Wireless versions eliminate the need for complex cabling and allow remote monitoring, which is particularly valuable in hazardous or hard-to-reach locations. ✔ Improved Efficiency Real-time data enables precise control, reducing lift time, avoiding trial-and-error setups, and streamlining the operation. ✔ Versatility Across Environments From offshore oil rigs to warehouse hoisting, tension link load cells adapt to a wide variety of working conditions and environments. Types of Tension Link Load Cells 🔹 Wired Tension Link Load Cell Includes a cable connection to a display or control unit. Ideal for fixed installations where reliability and budget are priorities. 🔹 Wireless Tension Link Load Cell Equipped with radio or Bluetooth transmitters, these are perfect for mobile and temporary lifting operations, offering greater flexibility. 🔹 Submersible Models Designed for underwater use or harsh marine environments with full IP68 sealing. Key Specifications (Typical) Specification Value/Range Capacity Range 1 ton – 500+ tons Accuracy ±0.1% of full scale Output Type mV/V, 4–20 mA, Bluetooth, RF Material Stainless steel or aluminum alloy Protection Rating IP65 to IP68 Operating Temperature -20°C to +70°C Display Options Handheld, wireless receiver, PLC Tension Link Load Cell vs Other Load Cells Load Cell Type Best Use Case Measurement Type Tension Link Load Cell Crane lifting, cable tensioning Tensile force only S-Type Load Cell Hanging scales, small force testing Tension & compression Shear Beam Load Cell Platform weighing, industrial scales Compression Canister Load Cell Truck scales, structural monitoring Compression Tension link load cells are specifically designed for inline tensile measurements and are the most practical option for mobile, high-capacity lifting tasks. Installation and Usage Tips Use Proper Shackles: Make sure the tension link fits securely and loads are aligned axially to avoid damage. Avoid Side Loading: Tension link load cells are optimized for straight pulls—lateral forces can affect accuracy. Calibrate Regularly: For certified lifting operations, periodic calibration ensures data accuracy and compliance. Check Battery Life: For wireless versions, monitor battery status and keep spares for critical operations. Secure Data Logging: Use handheld devices or cloud-enabled displays to store and analyze load history. Conclusion The tension link load cell is an essential tool for safe, efficient, and accurate tensile force measurement. Whether you're monitoring a crane lift, tensioning a cable, or verifying the safety of a hoisting system, this robust and portable sensor offers unmatched precision and real-time insight. With wireless capabilities, high durability, and easy integration, tension link load cells are a smart investment for any industry that relies on heavy lifting, rigging, or force monitoring. We are also supply in Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, and West Bengal

RTN Load Cell: High Precision Force Sensing for Industrial Applications In modern industrial and commercial environments, precise and reliable force measurement is critical for productivity, safety, and quality control. One of the most trusted solutions for these requirements is the RTN load cell—a rugged, high-performance ring torsion load cell used across various applications including tank weighing, silo monitoring, and process control systems. This article explains what an RTN load cell is, how it works, its benefits, and where it's best applied. If you're a design engineer, plant manager, or system integrator, understanding the advantages of the RTN load cell can help you achieve greater efficiency and measurement accuracy. What Is an RTN Load Cell? An RTN load cell (Ring Torsion Load Cell) is a compact, high-precision force sensor designed to measure compressive forces. It is based on torsion ring technology, where the sensor element deforms in a torsional pattern under load, rather than in a traditional linear compression. The RTN load cell's design provides enhanced resistance to lateral and dynamic forces, making it ideal for tough industrial environments. It is widely used for tank and vessel weighing, as well as in batching, mixing, and process automation systems where accurate force measurement is essential. How Does an RTN Load Cell Work? RTN load cells operate using a torsion ring structure equipped with strain gauges. When a compressive force is applied to the load cell, the torsion ring deforms slightly in a twisting motion. This deformation is captured by the strain gauges, which convert mechanical strain into an electrical signal. This signal is then amplified and interpreted by a signal conditioner or digital indicator to provide a real-time, precise reading of the applied load. The unique geometry of the ring torsion sensor helps distribute the load more evenly, leading to more accurate and repeatable results—even under off-center or side loading conditions. Key Features of RTN Load Cells ✅ High Accuracy RTN load cells are known for excellent precision, often reaching C3 to C6 classes (per OIML standards), making them suitable for legal-for-trade weighing systems. ✅ Compact, Low-Profile Design Their flat and compact form factor makes them ideal for installations with height or space restrictions, such as under tanks or platforms. ✅ Robust and Durable Built with stainless steel or high-strength alloys, RTN load cells can withstand challenging industrial conditions, including moisture, vibration, and temperature extremes. ✅ Excellent Off-Axis Load Compensation Thanks to the torsion ring design, these load cells offer superior stability against side loads and uneven force distribution. ✅ Wide Capacity Range RTN load cells are available in various capacities, typically from 100 kg to 60 tons, depending on the manufacturer. Applications of RTN Load Cells RTN load cells are versatile and widely used in industries such as: 1. Tank and Silo Weighing In the food, chemical, and pharmaceutical sectors, RTN load cells are used to measure the contents of silos, hoppers, and tanks with high accuracy. 2. Batching and Mixing Systems Accurate force feedback ensures the correct proportions of ingredients, helping maintain product quality and reduce material waste. 3. Industrial Automation RTN load cells play a vital role in robotic arms, automated filling lines, and other machinery requiring real-time load monitoring. 4. Platform and Floor Scales Used in high-precision industrial scales for shipping, logistics, and warehouse management systems. 5. Packaging Machines In high-speed production lines, RTN load cells help regulate fill levels and ensure consistency in packaging and sealing operations. Advantages of Using RTN Load Cells Here are some of the main benefits of integrating RTN load cells into your force measurement systems: ✔ Superior Accuracy in Real-World Conditions Thanks to their ring torsion design, RTN load cells maintain excellent accuracy even under challenging conditions like misaligned loading or dynamic movement. ✔ Long-Term Stability With minimal drift over time and strong resistance to fatigue, RTN load cells provide consistent performance over many years of operation. ✔ Easy Installation Their compact shape and mounting flexibility make them easier to install under tanks, platforms, or custom machinery. ✔ Resistance to Harsh Environments With environmental sealing (often IP67 or higher), these load cells are suitable for use in wash-down areas, chemical plants, and outdoor applications. ✔ Legal-for-Trade Use Many RTN load cells are OIML and NTEP certified, meaning they can be used in commercial applications requiring certified weighing accuracy. Technical Specifications (Typical) Specification Value Range Capacity 100 kg to 60,000 kg Accuracy Class C3 to C6 Output Signal 2.0 mV/V (typical) Material Stainless Steel / Alloy Steel Protection Class IP67 / IP68 Operating Temperature -30°C to +70°C Overload Protection Up to 150% of rated capacity RTN Load Cell vs Other Load Cell Types Load Cell Type Load Handling Best Application RTN Load Cell Compression Tank, silo, and batching system weighing Shear Beam Compression / Tension Platform and hopper scales S-Type Tension & Compression Mechanical testing, hanging scales Canister/Column High Compression Bridge and structural monitoring The RTN load cell stands out for compactness, ease of installation, and better off-axis compensation than most traditional compression load cells. Installation Tips for RTN Load Cells To ensure optimal performance: Mount Load Cell Evenly: Use flat, hardened mounting surfaces and follow the manufacturer’s mounting guidelines. Avoid Side Loads: While RTN load cells compensate for minor off-center loads, extreme lateral forces should be avoided. Use Load Buttons or Mounting Kits: These accessories help center the load and protect the load cell from overload or misalignment. Regular Calibration: Periodically check calibration to maintain legal-for-trade accuracy and process consistency. Conclusion The RTN load cell is a smart, reliable, and high-performance solution for many industrial weighing applications. Its innovative ring torsion design ensures high accuracy, stability, and resistance to external influences—making it ideal for use in tank weighing systems, batching processes, and automated industrial environments. If you’re looking for a compression load cell that performs well under pressure—both literally and figuratively—the RTN load cell is a top-tier option. We are also supply in Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, and West Bengal

What Is a Multicolumn Load Cell? A multicolumn load cell is a type of force sensor that uses multiple parallel columns to bear and measure heavy compressive loads. These load cells are designed to handle extremely high capacities—ranging from tens to thousands of tons—with high accuracy and reliability. Unlike single-column or shear beam load cells, multicolumn load cells distribute the force across several columns. This structural configuration minimizes deformation, reduces stress concentrations, and improves measurement stability. How Does a Multicolumn Load Cell Work? Multicolumn load cells operate on the principle of strain gauge technology. Each column in the load cell is instrumented with strain gauges that detect minute changes in length as force is applied. These changes in resistance are converted into an electrical signal that can be measured and calibrated to represent the exact force applied. The use of multiple columns ensures that the load is evenly distributed, which enhances linearity, repeatability, and overall performance under high-stress conditions. Key Features of Multi column Load Cells High Capacity Multi column load cells are engineered to handle extremely large forces, often exceeding 1000 kN or even 5000 kN in custom applications. Robust Construction Typically made from stainless steel or high-grade alloy, these load cells are built for durability in demanding environments. Superior Accuracy Their design minimizes off-axis loading effects, ensuring precise and repeatable readings even under fluctuating conditions. Environmental Resistance Many multi column load cells are sealed to IP67 or IP68 standards, allowing them to perform reliably in harsh conditions like dust, moisture, or temperature extremes. Fatigue Resistance Designed for long-term use under cyclic loading, these load cells can withstand millions of load cycles without degradation in performance. Applications of Multi column Load Cells 1. Heavy Machinery Testing Multi column load cells are widely used in testing the structural integrity of cranes, hoists, and other heavy machinery. Their ability to withstand high loads makes them ideal for verifying maximum capacity and stress points. 2. Aerospace and Defence In aerospace testing labs, multi column load cells measure the forces involved in aircraft landing gear, fuselage stress testing, and engine thrust assessments. 3. Automotive Crash and Durability Testing The automotive industry relies on these load cells for component stress analysis, frame testing, and crash simulations. 4. Material and Structural Testing Testing concrete, steel beams, and composite materials under compression or tensile loads requires reliable and precise sensors like multi column load cells. 5. Hydraulic and Mechanical Presses They are commonly integrated into press machines to monitor and control the amount of force being applied during forming, stamping, or forging processes. Benefits of Using a Multi column Load Cell ✔ High Load Capacity Multi column load cells are ideal for measuring loads that exceed the capabilities of traditional single-element load cells. ✔ Stability and Repeatability With multiple load-bearing columns, these sensors offer unmatched stability even under continuous or cyclic loading. ✔ Versatility Available in a wide range of capacities and configurations, they can be customised to suit unique industrial applications. ✔ Enhanced Safety Accurate force measurement ensures operational safety, especially when used in critical load monitoring systems. ✔ Long-Term Reliability Designed to operate over millions of cycles, they are suitable for long-term, maintenance-free use. Choosing the Right Multi column Load Cell When selecting a multi column load cell for your application, consider the following factors: Capacity Range: Choose a load cell with a capacity that matches or exceeds your maximum expected load. Accuracy Class: Depending on your application, you may need higher precision (e.g., 0.05% FS for lab testing). Environmental Conditions: Look for IP-rated cells if the application involves dust, water, or temperature variations. Mounting Requirements: Ensure compatibility with your test rig or system’s design. Signal Output Type: Common options include mV/V, 4-20mA, or digital output for easy integration with control systems. Multi column Load Cell vs Other Types Load Cell Type Load Capacity Accuracy Best For Multi column Very High High Heavy-duty and high-capacity testing Shear Beam Medium Medium Industrial scales, tank weighing S-type Low to Medium High Tension/compression in smaller ranges Single-Point Low Medium Small scales, retail applications Maintenance and Calibration Multi column load cells are generally low-maintenance but require periodic calibration to ensure long-term accuracy. Calibration should be performed by certified technicians using traceable weights or hydraulic calibration systems. Tips for Prolonged Load Cell Life: Avoid exceeding the rated capacity. Protect against side and impact loads. Use overload protection mechanisms. Regularly inspect mounting hardware and electrical connections. Conclusion A multi column load cell is a highly reliable and accurate force measurement device engineered for large-scale, high-capacity applications. Its multi-column architecture offers exceptional durability, load handling, and resistance to environmental factors. From aerospace to structural testing and heavy manufacturing, these load cells provide the precision and performance required in mission-critical environments. Whether you're looking to upgrade your testing setup or need reliable data from high-load operations, multi column load cells are a sound investment in measurement accuracy and system safety. We are also supply in Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, and West Bengal

In the intricate world of industrial measurement and control, few components hold as much quiet significance as the load cell. These unassuming transducers form the bedrock of countless weighing systems, material testing machines, and force measurement applications, translating physical force into a quantifiable electrical signal. Among the myriad designs and specifications available, the “60048 load cell” likely refers to a specific model or series within a manufacturer's lineup, embodying a particular set of characteristics tailored for certain operational demands. While without a precise manufacturer and model number, a detailed technical breakdown of the 60048 is impossible, we can explore the common features, applications, and critical considerations surrounding a generic load cell of this presumed designation, aiming for a comprehensive understanding of its role and importance within the 1000-word scope. At its core, a load cell like the 60048 operates on the principle of strain gauges. These delicate, precisely manufactured resistive elements are bonded to a specially machined metal body, often referred to as the “spring element” or “flexure.” When an external force is applied to the load cell, the spring element deforms microscopically. This deformation, or strain, causes a proportional change in the electrical resistance of the strain gauges. Typically, four strain gauges are arranged in a Wheatstone bridge configuration. This ingenious circuit amplifies the tiny resistance changes, converting them into a measurable voltage output that is directly proportional to the applied load. The 60048, by its very numerical designation, suggests a product with a specific part number, implying a defined capacity, accuracy class, material construction, and potentially unique features. Assuming it's a commonly encountered industrial load cell, it would likely fall into one of the prevailing design types: Bending Beam Load Cells: Characterized by a rectangular or square profile, these are widely used for platform scales, tank weighing, and general industrial applications. The 60048 could be a bending beam, offering good accuracy and robustness. Shear Beam Load Cells: Similar in appearance to bending beams but designed to measure shear forces, they are often found in low-profile scales and process weighing. Single Point Load Cells: Designed for direct mounting under a platform, eliminating the need for complex corner adjustments. If the 60048 is a single-point, it would be ideal for compact weighing solutions. Compression Load Cells: Built to withstand compressive forces, these are often cylindrical or canister-shaped and used in heavy-duty applications like truck scales or press force measurement. S-Type Load Cells: Recognizable by their distinctive “S” shape, these are versatile for both tension and compression applications, common in hoist and crane weighing. The specific type of the 60048 would dictate its optimal application. Regardless of its internal design, several critical parameters define the performance and suitability of any load cell, including our hypothetical 60048: Rated Capacity: This is the maximum load the 60048 is designed to measure accurately without damage. This would be a crucial specification, ranging from a few kilograms to hundreds of tons depending on the intended use. Accuracy Class/Error: Load cells are classified based on their accuracy, often expressed as a percentage of the rated output (e.g., C3, C4 per OIML R60 recommendations). A highly accurate 60048 would be crucial for legal-for-trade applications or precision manufacturing. Key error sources include non-linearity, hysteresis, creep, and temperature effect on zero and span. Material Construction: The body of the 60048 could be constructed from various materials, each offering different properties. Stainless steel is common for its corrosion resistance, especially in harsh environments (food processing, chemical industries). Alloy steel provides high strength and is often nickel-plated for some corrosion protection. Aluminum is used for lighter capacity and cost-effective solutions. The environment in Kathwada, Gujarat, with its potentially humid climate, might necessitate a corrosion-resistant material. Environmental Protection (IP Rating): The Ingress Protection (IP) rating indicates the 60048's resistance to dust and water. An IP67 or IP68 rating would be essential for outdoor use or washdown applications, protecting the sensitive internal strain gauges. Output Sensitivity (mV/V): This specifies the electrical output of the load cell per unit of excitation voltage. A typical value is 2 mV/V, meaning that for every volt of excitation, the load cell outputs 2 millivolts at its rated capacity. Operating Temperature Range: The range of temperatures over which the 60048 can operate within its specified accuracy. Mounting Configuration: How the load cell is physically installed. This could involve specific bolt patterns, spherical bearings, or self-aligning feet, all crucial for ensuring proper load application and minimizing side loads that can compromise accuracy. The applications for a 60048 load cell are virtually limitless wherever precise force or weight measurement is required. Consider its potential roles: Industrial Weighing: Platform scales, hopper scales, tank weighing systems, batching systems in industries ranging from food and beverage to chemicals and pharmaceuticals. The 60048 would be a critical component in ensuring accurate ingredient measurement and product consistency. Material Testing: Universal testing machines use load cells to measure tensile, compressive, and flexural strength of materials, vital for quality control and research and development. Process Control: Monitoring force in automated assembly lines, measuring tension in winding applications, or controlling pressure in hydraulic systems. Logistics and Transportation: Truck scales, rail scales, and onboard weighing systems in vehicles to ensure compliance with weight regulations and optimize payload. Medical Devices: Force measurement in rehabilitation equipment, surgical tools, and patient monitoring systems. Agriculture: Silo weighing, livestock scales, and precision farming equipment. The lifecycle of a 60048 load cell involves careful selection, proper installation, regular calibration, and sometimes, troubleshooting. Selecting the right 60048 requires a thorough understanding of the application's maximum load, required accuracy, environmental conditions, and budget. Installation is paramount; misalignment, uneven loading, or the introduction of parasitic forces can significantly degrade performance. Regular calibration against known standards is essential to maintain accuracy over time, compensating for minor material creep or environmental shifts. Troubleshooting a 60048 typically involves checking electrical connections, verifying excitation voltage, and looking for signs of mechanical damage or overload. While robust, load cells are not indestructible and can be damaged by shock loads, excessive side forces, or exposure to aggressive chemicals if not adequately protected. In conclusion, while the specific “60048 load cell” remains an unidentifiable product without a manufacturer's context, the principles governing its design, operation, and application are universal to the vast majority of load cells. It represents a vital cog in the machinery of modern industry, enabling precision, efficiency, and safety across an enormous spectrum of applications. Its unassuming exterior belies the sophisticated engineering within, turning the invisible force of weight into a tangible, measurable data point – a silent, enduring workhorse underpinning countless critical processes around the globe. We are also supply in Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, and West Bengal.

S Beam Load Cell Manufacturers We are also supply in Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, and West Bengal An S-Beam load cell, also known as an S-type or Z-beam load cell, is a type of force sensor named for its distinctive “S” shape. It is highly versatile and widely used in industrial and commercial applications to measure both tension and compression forces. How it works: The fundamental principle behind an S-beam load cell is the conversion of mechanical force into an electrical signal. Sensing Element: At its core, an S-beam load cell consists of a precisely machined metal body, often made of alloy steel or stainless steel, which acts as a spring element. This central beam is designed to deform elastically (bend or stretch) when a force is applied and return to its original shape when the force is removed. Strain Gauges: Attached to the surface of this central beam are highly sensitive electrical components called strain gauges. These thin, flexible devices have an electrical resistance that changes proportionally to the amount of strain (deformation) they experience. Wheatstone Bridge: The strain gauges are typically arranged in a Wheatstone bridge configuration. This circuit is extremely sensitive to small changes in resistance. Signal Generation: When a force (tension or compression) is applied to the S-beam load cell, the metal body deforms. This deformation causes the strain gauges to stretch or compress, which in turn changes their electrical resistance. Electrical Output: The change in resistance within the Wheatstone bridge unbalances the circuit, generating a measurable electrical signal (a voltage change). This electrical signal is directly proportional to the applied force. Signal Conditioning: This raw electrical signal is usually very small and needs to be amplified and processed by signal conditioning equipment (like amplifiers, filters, or analog-to-digital converters) to convert it into a usable format, such as a digital reading or an analog output. Key Features and Advantages: Dual Functionality: Measures both tension (pulling force) and compression (pushing force). High Accuracy: Known for providing precise measurements across a wide range of loads. Compact Design: Their S-shape often allows for a compact footprint, making them suitable for applications with limited space. Robust Construction: Typically made from durable materials like alloy steel or stainless steel, offering good resistance to harsh environments. Versatility: Can be used with various accessories like rod ends and load buttons for different mounting and application needs. Applications: S-beam load cells are incredibly versatile and find use in a wide array of industries and applications, including: Weighing Systems: Industrial scales (platform scales, hanging scales) Tank and hopper weighing systems (for liquids, powders, bulk materials) Conveyor belt weighing Batching plants Force Measurement: Material testing (tensile strength, compression testing) Cranes and hoists (for monitoring loads) Medical devices (e.g., patient lifting systems, grip force measurement, fluid flow rate) Robotics and automation Automotive testing Furniture testing Fatigue testing Process Control: Monitoring and controlling forces in manufacturing processes Quality control Overload protection in machinery Manufacturers and Pricing in India: Many manufacturers and suppliers offer S-beam load cells in India. Some common brands you might encounter include: You can find S-beam load cells from various vendors on platforms like IndiaMART. Pricing can vary significantly based on: Capacity: Ranging from a few kilograms to several tons. Material: Alloy steel is generally more economical, while stainless steel (often for corrosive or harsh environments) can be more expensive. Accuracy Class/Ingress Protection (IP Rating): Higher accuracy and better environmental sealing (e.g., IP68 for submersible applications) will increase the cost. Brand: Renowned international brands might have higher price points. Features: Overload protection, temperature compensation, and specific certifications can affect the price. As a general idea, based on current listings (as of July 2025), S-beam load cells in India can range from approximately ₹1,800 to ₹15,000 or more, depending on the specifications. For accurate pricing, it's best to contact specific suppliers and request quotes based on your exact requirements.

Introduction In modern engineering, robotics, and manufacturing industries, the need for compact, high-accuracy force sensors is greater than ever. One such sensor that stands out for its small form factor and excellent compression performance is the button load cell. Also known as a miniature compression load cell, this sensor type is ideal for applications with limited space but demanding precision. This comprehensive guide explores the design, function, benefits, and common uses of button load cells. We’ll also provide helpful tips for selecting the right sensor and include SEO-optimized keywords to improve visibility in search engines. What is a Button Load Cell? A button load cell is a small, disc-shaped force sensor designed primarily for compression force measurement. It gets its name from its resemblance to a flat button and is typically used in tight spaces where a traditional load cell won’t fit. Despite its compact size, a button load cell is capable of handling a wide range of forces—from a few Newtons up to several tons—while maintaining excellent accuracy and repeatability. How Button Load Cells Work Most button load cells operate using strain gauge technology. Here’s a breakdown of how they function: Force Application: A compressive force is applied to the center of the load cell's top surface. Strain Response: This force causes a slight deformation in the load cell's internal structure. Strain Gauge Reaction: Strain gauges bonded inside the sensor detect this deformation as a change in electrical resistance. Signal Conversion: The change in resistance is converted into an electrical signal (typically in mV/V), which is proportional to the force applied. Data Output: This signal can be fed into a data acquisition system (DAQ), amplifier, or display unit for real-time force monitoring. Key Features of Button Load Cells ✅ Ultra-Compact Design: Some models are as small as 5 mm in diameter. ✅ Compression-Only Measurement: Ideal for vertical load and press applications. ✅ Wide Capacity Range: Available in ranges from a few grams up to 100,000+ pounds. ✅ High Strength Materials: Constructed from stainless steel or alloy steel for industrial durability. ✅ High Accuracy and Repeatability: Ideal for precise, repeatable measurements in test environments. ✅ Low Deflection: Minimal deformation ensures fast response and high stiffness. Applications of Button Load Cells 1. Press Force Monitoring Used in manual and hydraulic presses to measure applied compressive forces during forming, stamping, or pressing processes. 2. Robotics and Automation In robot joints and end-effectors, button load cells provide compact force feedback to enhance control and safety. 3. Medical Device Testing Ideal for prosthetics, orthopedic implants, and surgical tools, where compact size and precision are vital. 4. Material Testing Machines Used in compression test rigs to measure the response of materials under load, such as in foam, rubber, and plastic testing. 5. R&D and Prototyping Engineers use button load cells in prototype builds where space is constrained but force feedback is needed. 6. Consumer Electronics Testing Used in testing the tactile force of keyboards, buttons, and touchscreens to ensure product consistency. Benefits of Using Button Load Cells ✔️ Space-Saving Installation The ultra-small footprint allows for integration in tight or embedded spaces without affecting the host device’s design. ✔️ Excellent Load Sensitivity Despite their small size, button load cells offer precise readings over a wide load range. ✔️ Easy Integration Flat-bottomed design allows for simple surface mounting or embedding into custom fixtures. ✔️ High Durability Built to withstand repeated use in industrial and lab environments without loss of accuracy. ✔️ Customizable Output Available with various signal output options, including: mV/V (standard strain gauge) 0–5V or 0–10V (amplified analog) 4–20mA (current loop) USB or digital (via external signal conditioner) Factors to Consider When Choosing a Button Load Cell 1. Force Capacity Choose a load cell that matches your expected maximum force. Always leave a safety margin to avoid overload. 2. Sensor Size Match the diameter and height of the sensor to your available space. 3. Mounting Method Ensure a stable, flat surface for installation. Some button load cells include threaded mounting holes or adhesive bases. 4. Output Signal Type Select a sensor with output compatible with your system—whether it's direct mV/V or amplified analog/digital. 5. Environmental Conditions If the sensor is used in wet, dusty, or high-temperature environments, look for models with IP-rated enclosures or environmental sealing. 6. Calibration Ensure the load cell comes with a NIST-traceable calibration certificate or equivalent. Regular calibration ensures long-term accuracy. Installation Tips Mount on Flat, Rigid Surfaces: Uneven surfaces may lead to incorrect readings. Avoid Lateral Loading: These sensors are designed for vertical (axial) compression only. Center the Load: Apply force directly to the center dome or button for best results. Use Load Pads if Needed: Some applications require load-distribution accessories to prevent damage from point loads. Protect Wiring: Strain-relieve cables and avoid sharp bends near the sensor body. Maintenance and Calibration Button load cells require minimal maintenance but should be checked periodically for: Physical damage or deformation Cable wear or signal interference Signal drift (zero-point shifting) Annual calibration is recommended for critical measurements, especially in regulated industries like aerospace or healthcare. Conclusion Button load cells are a vital part of the force measurement toolkit, especially in applications where size, accuracy, and simplicity matter. Whether you’re measuring press forces, embedding sensors in robotics, or testing medical devices, these compact compression sensors offer precision in a tiny package. With a variety of capacities, output types, and rugged designs, button load cells are suitable for both R&D and production environments. When selected and installed properly, they provide years of reliable, high-accuracy measurements in the most space-constrained settings. We are also supply in Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, and West Bengal

What is a Button Load Cell? A button load cell is a small, disc-shaped force sensor designed primarily for compression force measurement. It gets its name from its resemblance to a flat button and is typically used in tight spaces where a traditional load cell won’t fit. Despite its compact size, a button load cell is capable of handling a wide range of forces—from a few Newtons up to several tons—while maintaining excellent accuracy and repeatability. How Button Load Cells Work Most button load cells operate using strain gauge technology. Here’s a breakdown of how they function: Force Application: A compressive force is applied to the center of the load cell's top surface. Strain Response: This force causes a slight deformation in the load cell's internal structure. Strain Gauge Reaction: Strain gauges bonded inside the sensor detect this deformation as a change in electrical resistance. Signal Conversion: The change in resistance is converted into an electrical signal (typically in mV/V), which is proportional to the force applied. Data Output: This signal can be fed into a data acquisition system (DAQ), amplifier, or display unit for real-time force monitoring. Key Features of Button Load Cells ✅ Ultra-Compact Design: Some models are as small as 5 mm in diameter. ✅ Compression-Only Measurement: Ideal for vertical load and press applications. ✅ Wide Capacity Range: Available in ranges from a few grams up to 100,000+ pounds. ✅ High Strength Materials: Constructed from stainless steel or alloy steel for industrial durability. ✅ High Accuracy and Repeatability: Ideal for precise, repeatable measurements in test environments. ✅ Low Deflection: Minimal deformation ensures fast response and high stiffness. Applications of Button Load Cells 1. Press Force Monitoring Used in manual and hydraulic presses to measure applied compressive forces during forming, stamping, or pressing processes. 2. Robotics and Automation In robot joints and end-effectors, button load cells provide compact force feedback to enhance control and safety. 3. Medical Device Testing Ideal for prosthetics, orthopedic implants, and surgical tools, where compact size and precision are vital. 4. Material Testing Machines Used in compression test rigs to measure the response of materials under load, such as in foam, rubber, and plastic testing. 5. R&D and Prototyping Engineers use button load cells in prototype builds where space is constrained but force feedback is needed. 6. Consumer Electronics Testing Used in testing the tactile force of keyboards, buttons, and touchscreens to ensure product consistency. Benefits of Using Button Load Cells ✔️ Space-Saving Installation The ultra-small footprint allows for integration in tight or embedded spaces without affecting the host device’s design. ✔️ Excellent Load Sensitivity Despite their small size, button load cells offer precise readings over a wide load range. ✔️ Easy Integration Flat-bottomed design allows for simple surface mounting or embedding into custom fixtures. ✔️ High Durability Built to withstand repeated use in industrial and lab environments without loss of accuracy. ✔️ Customizable Output Available with various signal output options, including: mV/V (standard strain gauge) 0–5V or 0–10V (amplified analog) 4–20mA (current loop) USB or digital (via external signal conditioner) Factors to Consider When Choosing a Button Load Cell 1. Force Capacity Choose a load cell that matches your expected maximum force. Always leave a safety margin to avoid overload. 2. Sensor Size Match the diameter and height of the sensor to your available space. 3. Mounting Method Ensure a stable, flat surface for installation. Some button load cells include threaded mounting holes or adhesive bases. 4. Output Signal Type Select a sensor with output compatible with your system—whether it's direct mV/V or amplified analog/digital. 5. Environmental Conditions If the sensor is used in wet, dusty, or high-temperature environments, look for models with IP-rated enclosures or environmental sealing. 6. Calibration Ensure the load cell comes with a NIST-traceable calibration certificate or equivalent. Regular calibration ensures long-term accuracy. Installation Tips Mount on Flat, Rigid Surfaces: Uneven surfaces may lead to incorrect readings. Avoid Lateral Loading: These sensors are designed for vertical (axial) compression only. Center the Load: Apply force directly to the center dome or button for best results. Use Load Pads if Needed: Some applications require load-distribution accessories to prevent damage from point loads. Protect Wiring: Strain-relieve cables and avoid sharp bends near the sensor body. Maintenance and Calibration Button load cells require minimal maintenance but should be checked periodically for: Physical damage or deformation Cable wear or signal interference Signal drift (zero-point shifting) Annual calibration is recommended for critical measurements, especially in regulated industries like aerospace or healthcare. Conclusion Button load cells are a vital part of the force measurement toolkit, especially in applications where size, accuracy, and simplicity matter. Whether you’re measuring press forces, embedding sensors in robotics, or testing medical devices, these compact compression sensors offer precision in a tiny package. With a variety of capacities, output types, and rugged designs, button load cells are suitable for both R&D and production environments. When selected and installed properly, they provide years of reliable, high-accuracy measurements in the most space-constrained settings. We are also supply in Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, and West Bengal.load cell for force measurement